Facade engineering for Faridabad.
Glazed office and admin fronts, cladding for industrial buildings, and windows, doors and railings for Faridabad's new high-rise housing, made on our own line in the NCR.
What Faridabad asks of a facade.
Faridabad is one of Haryana's oldest industrial cities, and much of its building stock is industrial: engineering works, component makers and warehouses, each with an office or administration block that faces the road. Around the old city, Greater Faridabad has added large residential towers, and commercial buildings have followed along the main roads into Delhi.
That mix shapes the envelope. A factory wants a weather-tight, insulated skin and good daylight inside; its office block wants a presentable glazed front. A residential tower wants balcony doors, windows and railings in large repeated quantities, delivered in the order the floors are finished.
- Areas
- Greater Faridabad · Ballabgarh · Faridabad industrial areas · Palwal
- Made on
- Our own aluminium line in Gurugram, Haryana
- Scope
- Design, fabrication and installation of the building envelope
Designing for Faridabad's weather
The NCR's composite climate: very hot summers, cold winters, a short heavy monsoon, and dust from roads and industry.
- 01
Industrial walls need continuous insulation and airtight joints so heat and dust stay out of the working space.
- 02
Glazed admin fronts face the same summer sun as Delhi, so solar-control or low-E glass and thermally broken frames pay back.
- 03
Dust settles in sliding tracks and drainage paths. Profiles and drainage slots should be easy to clean.
- 04
On residential towers, balcony doors face wind-driven monsoon rain, so sills and tracks need a proper drainage route.
General design guidance. Wind, seismic and performance values for a building are set per project by the structural engineer and the facade consultant.
What we make for Faridabad.
A Faridabad project, step by step.
Our fabrication line is in Gurugram, so a project here is local to us. Site visits, the measured survey and mock-up reviews are easy to arrange, and fabricated frames reach site by road in the sequence the installation needs.
- 01
Site Visit
Measured survey and condition assessment.
- 02
Single Contact
One point of contact established for the project.
- 03
Scope & Design
Envelope scope frozen; shop drawings issued for approval.
- 04
Quotation
Transparent, itemised commercial offer against the frozen scope.
- 05
Fabrication
Production on our line, with in-process inspection before despatch.
- 06
Installation
Erection by our own site teams, to programme.
Facades in Faridabad
- Does Fenza Facade Engineering take on projects in Faridabad?
- Yes. Fenza takes on cladding, structural glazing, curtain wall, windows, doors and railings for factories, offices and housing in Faridabad and Greater Faridabad. Fabrication is on Fenza's own line in Gurugram, in the same NCR.
- What facade suits a factory office block in Faridabad?
- Usually a glazed or structurally glazed front for the office, cladding for the rest of the building, and solar-control glass to keep the office cool. The production hall itself often needs insulated cladding and skylights rather than glass.
- Which windows suit high-rise flats in Faridabad?
- Sliding doors and windows are common on balconies because they save space; casement windows seal tighter against dust and noise. Either way, drained sills and good gaskets matter for monsoon rain on upper floors.
- How do I get a facade quote for a Faridabad project?
- Send elevations and sections, the facade areas by type, the building height and any performance requirements through the enquiry form or by email. A partial package is enough for a first scope and budget range.
Building in Faridabad?
Tell us about the project: the location, the building, and the drawings you have. Our team will get in touch to discuss the next steps.